BUY NOW on eBay: https://www.ebay.co.uk/usr/triumphstuff

HERE I HAVE FOR SALE..

A Pair Of.... ShackTune LED Stop/Tail Rear Lamp Repair Modules. (Red)

These modules replace the original filament bulbs in 1940s, 1950s & 1960s cars, trucks, buses etc.

There primary use is for when your original rear lamps have the bulb holders damaged or corroded away.

They can be mounted inside any rear lamp unit and the wires fed to the original loom wiring. The colours of the wire follow the standardised British vehicle codes... Black - earth Red - side lights Green/purple - brake lights

The module has an inline electronics pack that controls the brightness, and shows low level when on side lights,  and high brightness when the brakes are pressed. The unit only consumes 130ma on brake and 10ma on side.

The lighting strip emits only deep red light, making a very pleasing glow in red lenses on side lights, and intense fire on full brightness. The brake lights are bright enough to be seen in sun light.

These are 12 volt negative earth vehicles only... Positive earth are under development,  please contact me if are interested in pos earth version.

The module is 68mm long x 17mm wide.

PLEASE NOTE- It is down to the buyer to affix the modules in to your rear lamp units, using whatever method is required.

YOU MUST NOT BEND THE WIRES RIGHT NEXT TO THE LIGHT BOARD, as it will break the connection. THE BULGE IN THE LOOM SHOULD NOT BE BENT, as this will also do damage to the electronics..

Thanks TriumphStuff