BUY NOW on eBay: https://www.ebay.co.uk/usr/triumphstuff

HERE I HAVE FOR SALE.. Black or Translucent (semi clear) Pipe.. Please contact me after purchase via Ebay messages, to let me know which pipe finish you require.. Black or White. If i don't hear from you, i will assume you want black.. A kit for the replacement of the plastic injector pipes fitted to all Lucas mechanical fuel injection cars. Triumph TR5, TR6, T2000 2.5PI MK1, MK2. And of course, any hybrid Spitfire or GT6 using Lucas Pi.. Also suitable for Jaguar, Saab, Mini, Ford when fitted with Lucas mechanical fuel injection. At best, the pipe fitted to most cars is 50 years old..  At worst they are 57 years old !!!!. It is now becoming a regular occurrence, where one or more of these pipes breaks away at the injector end. After years of sitting over the exhaust area, with the heat and vibration..... They have had enough, and are becoming very brittle !!!! The Kit Contains- Enough pipe to rebuild all 6 injector pipes A pair of reclaimed hardwood blocks, to safely and securely hold the pipe A basic set of instructions on how to fit the pipe to your original ends. The roll of pipe has more than is required, to allow for those that want to re-route or extend their Pi pipes. Alloy Rocker covers sit higher and are impossible to remove, without removing all the injectors first. So, Make All The Pipes 4cm Longer.. FAQ's.... The pipe you will receive is suitable for use with Fuels containing Ethanol up to 100% concentration, So will not struggle with all standard available fuels containing 10 to 15% Ethanol. The pipe is stable in use, up to 150 degrees Centigrade. with a melting temperature of over 230c. Note- Over a long period of time, the original pipes have shrunk.All lengths quoted in the instructions, are for virgin pipes... Not the shrunken length fitted to your car.Do Not Assume Your Original Pipes Were The Correct Length !!!!!!!. THANKS...     TRIUMPHSTUFF...